What is this Machine Used for?- Single working table
- Cut metal Sheet, metal tube not available
- 1.5kw/2kw/3kw/4kw available
| Model | SF3015G/SF4015G/SF4020G/SF6015G/SF6020G metal laser cutting machine |
| Working Area | 3050*1525/4050*1525/4050*2020/6050*1525/6050*2020 |
| Laser Power(kw） | 1.5/2/3/4 |
| Maximum Speed（m/min） | 80 |
| Maximum acceleration（g） | 0.8 |
| X/Y Axis positioning accuracy（mm/m） | ±0.05 |
| X/Y Axis repeated positioning accuracy（mm） | ± 0.02 |
Simple Structure and Easy to Operate
Thanks to open structure without top cover, users will be crystal clear about entire work process. This single-platform machine has small footprint and low demands on workplace. It may be moved flexibly by using forks.
* Open structure and single platform
* Load & unload from front, right and left side
Fast to Remove Smoke and Dust
Intelligent spiral negative-pressure dust removal system can control air vents in real time along with cutting position. In combination with bottom U-shaped sealing structure, cutting runs in parallel with smoke exhaust to enable nearly smoke-free effects.
Stand Out in Functions
Its power widely ranges from low to high power. So, thin sheet is cut rapidly and thick sheet (60mm at extreme) is handled at high quality, of which section is smooth with no burr or adhering slag. Basically no need for secondary polishing.
- * Perfect Finish Cut
Avoid over-burning or adhering slag
* Pierce-through Deslagging
Make the section much smoother
* Flying Cut and Frog Leaping
Minimize idling movement
* Co-edge Cutting
Cut same sides only once
Reviews
There are no reviews yet.